Mobile phone anti-theft display stand by the alarm host, multi-contact alarm probe, 3M glue and other components. When the alarm host installed in the display stand or showcase, the phone attached to the alarm host probe. The customer can easily remove the phone from the display stand, free on the phone's function and appearance of the operation and feel, if the customer wants to take the phone, the alarm will immediately issued a continuous alarm sound, the alarm will continue to the management staff To do the reset processing.

1. Clean the display cabinet, and then open the bottom of the mobile phone anti-theft display stand switch, anti-theft display at the bottom of 3M glue and display cabinet paste firmly.
2. Then the phone anti-theft display of the charger and the host connection, the other end into the power plug board, to prepare for the plane to charge once.
3. Tear off the anti-theft display rack placed the location of the mobile phone 3M glue, the phone paste in the anti-theft display stand.
4. Texture the 3M glue on the sensor contacts and stick to the front of the phone.
5. Take out the infrared remote control, press the ON key, so that the host is armed.
6. Installation is complete.